Asymtek automatic jet dispenser
Asymtek Spectrum™ II S2-920
● Calibration module: vacuum cleaning and automatic reference point setting
A digital image system with a new highlighted RGB view system
● Signal lights with alarm
Low pressure sensor
● Manual setting of colloid and valve pressure
● Contact height sensor
● Support all Nordson ASYMTEK company's injection valve, dispensing valve and dispensing pump
● Front heating platform and rear heating platform
A digital image system with a new highlighted RGB view system
● Signal lights with alarm
Low pressure sensor
● Manual setting of colloid and valve pressure
● Contact height sensor
● Support all Nordson ASYMTEK company's injection valve, dispensing valve and dispensing pump
● Front heating platform and rear heating platform
● Dispensing area (X-Y)
311 x 412 mm (12.3 x 16.2 in.) Integrated contact height sensor
337 x 412 mm (13.3 x 16.2 in.) Integrated laser height sensor
● transmission system
Substrate / Carrier Max Length: Single Platform: 340mm (13.4 ") Triple Platform: 320mm (12.6")
Substrate / carrier minimum length: 25 mm (1.0 inch)
Base plate / carrier max. Width (4): Monorail: 535 mm (21.1 in.) Dual rail: up to 228 mm (9.0 in.) (Configurable variable)
Substrate / carrier minimum width (5): 34 mm (1.3 inches)
Substrate / vehicle maximum concentration: 12 mm (0.5 inch)
Maximum gap above substrate: 30 mm (1.2 in) Base clearance: 2.75 mm (0.11 in.)
● Sports system
Z-axis repeatability: ± 5 microns (0.0002 inches), 3 sigma
X-Y repeatability: ± 15 microns (0.0006 inches), 3 sigma
X-Y Acceleration: 1 g max
X-Y speed: 1 m / s maximum (40 in / s)
X-Y-Z coding accuracy: 1 micron
● Factory requirements
System area: single heating platform: 600 mm wide x 1321 mm deep (23.6 x 52.0 inches)
Dual heating platform: 850 x 1321 mm (33.5 x 52.0 in.) Three heating platforms: 1100 x 1321 mm (43.3 x 52.0 inches)
Air supply (7): Dual compressed air supply: 1) 3 CFM @ 100 psi compressed air supply support, and 2) 1 CFM @ 100 psi compressed air
Power supply (main): the corresponding power supply, the proposed 200-240 volts AC, 47-63 Hz single phase, 10 A
Ventilation (8): Drain down or upward
System weight (9): 377 - 422 kg (830-930 lbs)
311 x 412 mm (12.3 x 16.2 in.) Integrated contact height sensor
337 x 412 mm (13.3 x 16.2 in.) Integrated laser height sensor
● transmission system
Substrate / Carrier Max Length: Single Platform: 340mm (13.4 ") Triple Platform: 320mm (12.6")
Substrate / carrier minimum length: 25 mm (1.0 inch)
Base plate / carrier max. Width (4): Monorail: 535 mm (21.1 in.) Dual rail: up to 228 mm (9.0 in.) (Configurable variable)
Substrate / carrier minimum width (5): 34 mm (1.3 inches)
Substrate / vehicle maximum concentration: 12 mm (0.5 inch)
Maximum gap above substrate: 30 mm (1.2 in) Base clearance: 2.75 mm (0.11 in.)
● Sports system
Z-axis repeatability: ± 5 microns (0.0002 inches), 3 sigma
X-Y repeatability: ± 15 microns (0.0006 inches), 3 sigma
X-Y Acceleration: 1 g max
X-Y speed: 1 m / s maximum (40 in / s)
X-Y-Z coding accuracy: 1 micron
● Factory requirements
System area: single heating platform: 600 mm wide x 1321 mm deep (23.6 x 52.0 inches)
Dual heating platform: 850 x 1321 mm (33.5 x 52.0 in.) Three heating platforms: 1100 x 1321 mm (43.3 x 52.0 inches)
Air supply (7): Dual compressed air supply: 1) 3 CFM @ 100 psi compressed air supply support, and 2) 1 CFM @ 100 psi compressed air
Power supply (main): the corresponding power supply, the proposed 200-240 volts AC, 47-63 Hz single phase, 10 A
Ventilation (8): Drain down or upward
System weight (9): 377 - 422 kg (830-930 lbs)